How to find the BPM of your vinyl records
Short answer: set the pitch fader to 0% and play the record at its correct speed (33⅓ or 45 RPM). Count the kick drums for 15 seconds and multiply by 4 — or count for 30 seconds and multiply by 2 for a more accurate number. To skip the counting, tap along in a tap-tempo app, look the track up in a BPM database, or use an app like Vinyl Crates to fill in the BPM of every record in your Discogs collection at once.
1. Count the beats
This is the method every DJ should know, because it works anywhere and needs nothing but a watch.
- Set the pitch fader to
0%. On most direct-drive decks the fader clicks into a centre detent. - Check the speed. Most 12-inch singles play at 45 RPM; most LPs at 33⅓. The label usually says.
- Drop the needle in a steady section, not the intro or a breakdown.
- Count kicks (or claps on 2 and 4, then double) for 30 seconds and multiply by 2.
A 15-second count is quick but can be out by 2–4 BPM. Thirty seconds gets you within about 1–2 BPM; a full minute is exact enough for any mix.
2. Tap the tempo
Tap along with the kick on a tap-tempo app or your mixer's tap button (if it has one) for 8–16 beats. Most tap tools average your taps, so the longer you tap, the steadier the reading. Vinyl Crates has a tap button on every track so the number goes straight into your collection.
3. Look it up
Many released tracks have their tempo listed in online BPM databases. Search by artist and title, and check that the version matches — the radio edit, the club mix and the dub on the same 12-inch can differ. Discogs is the best catalogue of pressings, but most Discogs listings don't include BPM.
4. Do the whole collection
Counting a few hundred records by hand takes days. Vinyl Crates connects to Discogs, imports your collection and looks up the BPM, Camelot key and energy of every track. Anything it can't find is retried every hour, and you can tap or type a BPM yourself at any time — a BPM you set is never overwritten.
Watch out for these mistakes
| Mistake | What happens | Fix |
|---|---|---|
| Wrong speed (33 vs 45) | The BPM is off by about 35%. A 120 BPM track at 33⅓ reads about 89. | Check the label; 45 ÷ 33⅓ = 1.35. |
| Pitch fader not at 0% | You measure the pitched tempo, not the record. | Reset to the centre detent first. |
| Half or double time | A 95 BPM hip-hop record can count as 190; a 170 BPM salsa can feel like 85. | Pick one way to count per genre and stay consistent. |
| Live drummer | Disco, soul and salsa played by bands drift a few BPM through the track. | Measure the section you'll actually mix in and out of. |
Vinyl Crates shows tempos between 70 and 140 BPM, folding half- and double-time readings into the range most DJs count in. Fast genres such as drum and bass are left at their real tempo.
The pitch-fader formula
Once you know two records' BPMs, this tells you where to set the fader so the incoming record matches the one playing:
fader % = (BPM now playing ÷ BPM of next record − 1) × 100 Example: 98 ÷ 96 − 1 = 0.0208 → set the fader to +2.1%A standard ±8% fader reaches about 8% either side of the record's tempo: a 120 BPM record can play from about 110 to 130 BPM. Vinyl Crates shows this number next to every suggestion.
Quick answers
How do I find the BPM of a record without an app?
Set the pitch fader to 0%, play the record at the right speed, count the kick drums for 30 seconds and multiply by 2.
Why is the BPM of my record wrong?
The most common causes are playing a 45 at 33⅓ RPM (or the reverse), leaving the pitch fader off 0%, or counting in half or double time.
Does Discogs show BPM?
Usually not. Discogs is a catalogue of releases and pressings; most listings don't include tempo. Vinyl Crates uses your Discogs collection to look up BPM, key and energy for each track.
How much does 1% on the pitch fader change the BPM?
One percent of the record's tempo. At 120 BPM, +1% is 1.2 BPM faster; at 90 BPM it is 0.9 BPM faster.